Product Name: Sodium 3-(2-Propyn-1-yloxy)-1-propanesulfonate
Synonyms: Limited synonyms available but often referenced as Propargyl-oxy-propanesulfonate sodium salt
Chemical Formula: C6H7NaO4S
CAS Number: 1005540-51-1
Recommended Use: Useful in chemical synthesis, including polymer chemistry, electroplating, and certain surfactant technologies.
Manufacturer/Supplier: Details provided by the chemical distributor or supplier; always verify source for purity and handling suggestions.
Emergency Contact: Company emergency phone or local Poison Control Center
Address: Listed from the SDS provider or distributor documentation
Classification: May cause skin and eye irritation. Considered as an irritant if inhaled or ingested, with risks similar to other sulfonate compounds.
Hazard Pictograms: Exclamation mark (may indicate health hazard), corrosion (possible skin/eye damage)
Signal Word: Warning
Hazard Statements: H315: Causes skin irritation; H319: Causes serious eye irritation; H335: May cause respiratory irritation
Precautionary Statements: Avoid breathing dust, use in a well-ventilated area, wear eye protection and gloves, wash thoroughly after handling
Other Hazards: Dust can be explosible in air; avoid open flames, heat, and ignition sources
Chemical Name: Sodium 3-(2-Propyn-1-yloxy)-1-propanesulfonate
Concentration: Greater than 95%
Impurities: Minor byproducts from synthesis typically below 2%
EC Number: Not assigned; consult supplier for exact documentation
Molecular Weight: 198.17 g/mol
Inhalation: Move person to fresh air, keep comfortable for breathing, seek medical attention if symptoms develop such as persistent cough or shortness of breath
Skin Contact: Wash area thoroughly with soap and water, remove contaminated clothing, seek medical attention for irritation or allergic reactions
Eye Contact: Rinse carefully with water for at least 15 minutes, lifting eyelids occasionally, obtain medical assistance if irritation persists
Ingestion: Rinse mouth with water, give small amounts of water to drink, do not induce vomiting, contact a physician or poison control center immediately
Most Important Symptoms: Irritation, redness, coughing, discomfort in upper respiratory tract
Suitable Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide for small fires
Specific Hazards: May release toxic and irritating fumes such as sulfur oxides, sodium oxides upon combustion
Protective Equipment: Firefighters wear self-contained breathing apparatus and full protective gear
Explosion Data: Fine dust suspended in air may ignite, exercise caution regarding dust accumulation
Advice for Firefighters: Control runoff, use personal protective equipment, stay upwind of fire
Personal Precautions: Use personal protective equipment, avoid breathing dust, ensure adequate ventilation
Environmental Precautions: Prevent further leakage if safe to do so, do not allow product to enter drains, surface water, or groundwater
Methods for Containment: Sweep up and shovel, avoid generating dusty conditions
Methods for Cleaning Up: Scoop or sweep material into a suitable container for disposal, clean contaminated surface with soap and water, ventilate area
Safe Handling: Keep away from heat, sparks, open flames. Minimize dust generation and accumulation, ground all equipment when transferring material.
Handling Advice: Wear appropriate protective gear, keep containers closed when not in use.
Storage Conditions: Store in a cool, dry, well-ventilated place; store away from incompatible substances such as strong oxidizing agents
Packaging Materials: Use original containers with tight closures, avoid damage to packaging
Control Parameters: No established occupational exposure limits for this compound
Engineering Controls: Work with adequate ventilation such as local exhaust, avoid inhaling dust
Personal Protective Equipment: Safety goggles, chemical-resistant gloves, lab coat or long sleeves, use a dust mask or respirator where dust formation is possible
Hygiene Measures: Wash hands before breaks and at end of use, avoid contact with skin, eyes, and clothing, launder contaminated clothing before reuse
Appearance: White crystalline powder
Odor: Odorless to faint characteristic odor
Odor Threshold: Not determined
pH: Neutral to slightly basic in aqueous solution
Melting Point/Freezing Point: Decomposes before melting
Initial Boiling Point and Boiling Range: Not applicable (decomposes)
Flash Point: Not applicable
Evaporation Rate: Not volatile
Flammability: Not highly flammable, but can form combustible dust-air mixtures
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Relative Density: 1.3–1.4 g/cm3
Solubility: Soluble in water
Partition coefficient (n-octanol/water): Not determined
Auto-Ignition Temperature: Not available
Decomposition Temperature: Above 200°C
Viscosity: Not applicable (solid)
Chemical Stability: Stable under normal temperatures and pressures
Possibility of Hazardous Reactions: No dangerous reactions known under normal conditions
Conditions to Avoid: Excessive heat, formation of dust clouds, strong oxidizers
Incompatible Materials: Strong oxidizing agents, strong acids
Hazardous Decomposition Products: Sulfur oxides, sodium oxides, carbon oxides under fire conditions
Routes of Exposure: Inhalation, ingestion, skin, or eye contact
Acute Toxicity: Limited data available, considered low based on related sulfonate compounds
Skin Corrosion/Irritation: Potential for irritation with prolonged or repeated exposure
Serious Eye Damage/Irritation: May cause moderate eye irritation
Respiratory Sensitization: No data suggesting sensitization
Carcinogenicity: No indication of carcinogenic effects from available data
Reproductive Toxicity: No known significant risks
Target Organ Effects: Prolonged exposure may affect skin, eyes, respiratory system
Other Effects: High exposure to dust may aggravate pre-existing conditions such as asthma or dermatitis
Ecotoxicity: Data limited; expected to have some toxicity to aquatic life based on sulfonate structure
Persistence and Degradability: Compound may persist under some environmental conditions, degradation slow
Bioaccumulative Potential: Based on chemical structure, potential for accumulation considered low
Mobility in Soil: Readily soluble in water, may migrate in soil
Other Adverse Effects: Avoid uncontrolled release to the environment, inform authorities in the event of large spills
Waste Disposal Methods: Dispose of contents in accordance with local, regional, national, and international regulations; do not dump into sewers or waterways
Contaminated Packaging: Dispose of as unused product; triple rinse containers before re-use or recycling where allowed
Recycling: Consult waste handler or local regulations
UN Number: Not classified as hazardous for transport
UN Proper Shipping Name: Not regulated
Transport Hazard Class: Not regulated
Packing Group: Not applicable
Marine Pollutant: Data lacking, treat as non-marine pollutant unless regulations indicate otherwise
Special Precautions: Avoid generating dust during transport, secure containers to prevent spillage
TSCA (USA): Check status before import or use
DSL/NDSL (Canada): Details available from the supplier
EINECS/ELINCS (Europe): Not listed or pending registration
OECD: Chemical not listed as a priority pollutant
Other Regulations: Follow any workplace restrictions for hazardous substances, ensure all Safety Data Sheet requirements are met at site
Labeling Requirements: Appropriate hazard labels required for workplace and transport; include GHS pictograms and signal words
