Product Name: 3-(Acetyl Methyl Amino)-1-Propanesulfonic Acid Calcium Salt
Chemical Synonyms: None identified in major chemical databases
Product Use: Research and laboratory chemical, not for drug, food, or household use
Supplier: Contact details of supplier, including phone number, email, and emergency contact required on label
CAS Number: Unique identifier if available; missing CAS calls for extra verification of composition
GHS Classification: Information may show slight eye or skin irritation, respiratory discomfort at high concentrations
Hazard Statements: Possible irritant to skin, eyes, and upper respiratory tract
Signal Word: Warning
Precautionary Statements: Avoid contact with eyes, skin, and clothing. Use adequate ventilation. Wash hands after use.
Hazard Pictograms: Exclamation mark for irritant effects
Emergency Overview: Dry powder, white to off-white color. Creates dust that may cause eye or skin irritation.
Chemical Name: 3-(Acetyl Methyl Amino)-1-Propanesulfonic Acid Calcium Salt
Purity: Usually over 97%, typical for research chemicals
Impurities: Trace residual solvents possible, depending on synthesis method
Molecular Formula: C6H13NO4S·Ca
Molecular Weight: Approximate value, calculated from molecular formula
Other Components: No known hazardous impurities above regulatory thresholds
Inhalation: Remove affected person to fresh air. Seek medical attention if symptoms develop.
Skin Contact: Wash off with plenty of water, use soap. Take off contaminated clothing.
Eye Contact: Flush with plenty of running water for at least 15 minutes. Prompt medical attention helps recovery.
Ingestion: Rinse mouth. Lean on medical advice. Do not induce vomiting unless instructed.
Most Important Symptoms: Mild irritation, redness, coughing, temporary discomfort
Suitable Extinguishing Media: Water spray, dry powder, foam, or carbon dioxide
Unsuitable Extinguishing Media: Strong water jets can spread powder
Special Hazards: Combustion yields carbon oxides, nitrogen oxides, and sulfur oxides
Advice for Firefighters: Wear self-contained breathing apparatus. Protective clothing necessary. Remove containers from fire area if safe.
Fire/Explosion Risk: Not classified as flammable but can support combustion under heat
Personal Precautions: Wear gloves, eye protection, and dust mask if available
Environmental Precautions: Avoid spillage into sewers and waterways
Cleanup Methods: Scoop up dry powder with minimal dust generation. Collect into suitable waste containers. Wipe area with damp cloth.
Reference to Other Sections: See section on exposure controls and personal protection for gear recommendations
Precautions for Safe Handling: Use in well-ventilated area. Avoid breathing dust. Wash hands and exposed skin after handling.
Conditions for Safe Storage: Store in tightly sealed container in cool, dry place. Keep out of reach of children.
Incompatibilities: Store away from oxidizing agents and strong acids or bases
Specific Uses: Laboratory reagent; follow local protocol for chemical use and disposal
Exposure Limits: No established occupational exposure limits available
Engineering Controls: Work in fume hood or with local exhaust ventilation
Personal Protective Equipment: Safety glasses, disposable gloves, lab coat. Dust mask recommended in case of inadequate ventilation.
Hygiene Measures: Wash hands before breaks and after use. Take off contaminated clothing.
Environmental Exposure: Prevent dust/solid run-off into soil or water courses
Appearance: White to off-white, fine powder
Odor: No characteristic odor
pH: Aqueous solution shows slightly acidic to neutral pH, depending on concentration
Melting Point/Range: No data found, estimated above 200°C based on similar compounds
Solubility: Freely soluble in water
Boiling Point: Not applicable (decomposes before boiling)
Density: Typical for small molecular weight organic salts
Flash Point: Not relevant (solid, non-volatile)
Partition Coefficient (log Kow): Low, favors aqueous phase
Chemical Stability: Stable under standard conditions
Reactivity: Does not react under normal lab storage or handling
Conditions to Avoid: Strong heat, open flames
Incompatible Materials: Strong oxidizers, strong acids
Hazardous Decomposition Products: Emits toxic fumes of nitrogen oxides, sulfur oxides, and carbon monoxide/dioxide when heated to decomposition
Acute Toxicity: Not classified as acutely toxic based on available data
Skin/Eye Irritation: May cause temporary discomfort or irritation
Respiratory Effects: Dust inhalation can cause mild irritation
Chronic Toxicity: No data showing long-term health effects
Carcinogenicity: Not listed by IARC, NTP, or OSHA as carcinogen
Sensitization: Reports of skin or respiratory sensitization not found in published literature
Ecotoxicity: No specific studies found; expected low hazard in small lab-scale releases
Persistence and Degradability: Organic component likely to biodegrade slowly in soil or water
Bioaccumulative Potential: Low for this class of compounds
Mobility in Soil: Compound is ionic and mobile in water, could migrate in soil if spilled
Other Adverse Effects: No large-scale environmental impacts reported in databases for related compounds
Waste Treatment Methods: Collect solid residues in tightly-sealed containers. Disposal through licensed chemical waste facility.
Contaminated Packaging: Rinse and treat as hazardous waste. Do not reuse for food or drink.
Special Precautions: Follow local, regional, and national regulations for chemical waste
Recommended Disposal: Incinerate or landfill using approved site, in accordance with environmental protection guidelines
UN Number: Not regulated as a dangerous good for transport
Proper Shipping Name: Laboratory chemical, not otherwise specified
Transport Hazard Class: Not assigned
Packing Group: Not classified
Marine Pollutant: Not expected
Special Precautions: Protect from moisture, heat, and physical damage on route
US Federal Regulations: Not listed under major chemical safety acts like SARA Title III or CERCLA
OSHA Status: Considered hazardous by OSHA Hazard Communication Rule based on potential irritation
TSCA Listing: Registration or exemption status should be confirmed by supplier
EU Regulations: Not classified as hazardous under current CLP Regulation
Canada DSL/NDSL: Not listed, supplier should clarify without default assumption
Additional Local Regulations: Site-specific requirements for chemical use and disposal apply based on area
