Product Name: 1-Propanesulfonic Acid, 3-[Hexyl[(Nonafluorobutyl)Sulfonyl]Amino]-2-Hydroxy-, Monoammonium Salt
Synonyms: No common synonyms documented
Chemical Formula: C13H26F9NO6S2
CAS Number: 940989-23-9
Recommended Use: Laboratory reagent, intermediate in chemical synthesis
Manufacturer Information: Supplier contact details must be used for procurement, emergency and technical questions
Emergency Contact: Reach out to chemical safety hotlines registered with the supplier or local regulatory agencies
Hazard Classification: Acute toxicity (oral, dermal), Eye irritation, Prolonged environmental hazard
Signal Word: Warning
Hazard Statements: Harmful if swallowed; causes serious eye irritation; may cause respiratory irritation; suspected of damaging organs through prolonged or repeated exposure
Pictograms: Exclamation mark, health hazard symbol
Precautionary Statements: Avoid ingesting, inhaling or getting substance in eyes, wear appropriate eye and skin protection, proceed to an emergency station if exposed
Routes of Exposure: Ingestion, inhalation, skin absorption, eye contact
Symptoms: Irritation of eyes, skin and respiratory tract, nausea, headache, allergic reactions for sensitive individuals
Chemical Name: 1-Propanesulfonic Acid, 3-[Hexyl[(Nonafluorobutyl)Sulfonyl]Amino]-2-Hydroxy-, Monoammonium Salt
CAS Number: 940989-23-9
Purity: Greater than 95% by weight
Impurities: Less than 2% inorganic salts, Less than 1% organic byproducts
Additives: None specified
Inhalation: Remove to fresh air promptly; seek medical advice if symptoms appear or breathing is difficult
Skin Contact: Wash affected area with soap and water for at least 15 minutes, remove contaminated clothing, seek medical attention if irritation continues
Eye Contact: Rinse eyes under running water for several minutes, remove contact lenses if present, hold eyelids apart and continue rinsing, seek medical attention
Ingestion: Rinse mouth, never give anything by mouth if person is unconscious, seek immediate medical attention
Important Symptoms: Eye, skin and respiratory tract irritation, gastrointestinal discomfort
Immediate Medical Attention: Always recommended for any form of exposure
Suitable Extinguishing Media: Use dry chemical, carbon dioxide, foam, water spray; avoid direct water jets
Specific Hazards: May decompose to release toxic gases including sulfur oxides, ammonia, and fluorinated compounds
Protective Equipment: Wear full protective gear including self-contained breathing apparatus and protective clothing
Firefighting Procedures: Approach upwind of the fire, contain spilled material, remain cautious of slippery surfaces caused by extinguishing agents
Flash Point: Not determined but presumed to be above ambient temperature, avoid sources of ignition
Personal Protection: Wear chemical-resistant gloves, laboratory coat, eye protection and suitable respiratory mask
Environmental Precautions: Prevent entry into soil, sewers and waterways; use absorbent materials to contain spread
Clean-Up Methods: Sweep up with non-sparking tools, avoid creating dust, collect in suitable closed containers for disposal, ventilate area
Decontamination: Wash spill area thoroughly with suitable detergents, allow adequate time for area to dry
Notification: Report significant releases to local authorities as required by regulations
Handling: Handle in a well-ventilated space, avoid inhaling vapors, dust or fumes, keep away from food and beverages, wash hands thoroughly after handling
Storage: Store in tightly closed original containers, in a cool dry place away from direct sunlight and incompatible substances such as oxidizing agents, acids or bases; avoid storing above room temperature
Incompatibilities: Reacts with strong acids, strong bases and oxidizers, avoid storing near flammable materials
Hygiene Practices: Remove contaminated clothing before leaving the work area, maintain good housekeeping in storage and handling zones
Exposure Limits: No established occupational exposure limits specific to this compound; minimize exposure through engineering and personal controls
Engineering Controls: Work under chemical fume hood, use local exhaust ventilation, maintain air quality
Personal Protective Equipment: Use NIOSH-approved respirator when dust, mist or fumes occur; wear chemical-resistant gloves such as nitrile; use splash-proof goggles and laboratory overalls
Hygiene Measures: Do not eat, drink, or smoke during use; wash hands before eating or after exposure; keep work surfaces clean
Appearance: White to off-white solid or crystalline powder
Odor: Odorless or faint chemical scent
Odor Threshold: Not established
pH: Neutral to slightly acidic aqueous solutions
Melting Point: Decomposes at elevated temperatures; estimated above 200°C
Boiling Point: Not applicable (decomposes before boiling)
Flash Point: Not determined
Flammability: Non-flammable as supplied
Vapor Pressure: Not available (negligible under ambient conditions)
Solubility: Soluble in water, slightly soluble in polar organic solvents
Density: Approximately 1.7 g/cm³
Partition Coefficient: Not determined
Viscosity: Not applicable (solid at room temperature)
Chemical Stability: Stable under recommended handling and storage conditions
Reactivity: Does not exhibit hazardous reactivity with most materials under ambient circumstances
Conditions to Avoid: Excessive heat, open flames, strong oxidizers, strong acids and bases
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, sulfur oxides, ammonia, various fluorinated compounds
Polymerization: Not anticipated under normal conditions
Incompatibilities: Keep away from strong oxidants, strong reducers and acids or bases
Routes of Exposure: Skin, eye, inhalation, ingestion
Potential Effects: Eye irritation, skin redness or dryness, respiratory tract irritation, nausea and headache if ingested
Acute Toxicity: Estimated LD50 greater than 500 mg/kg (oral, rat), may cause irritation at higher concentrations
Chronic Effects: Possible sensitization in predisposed individuals, data on mutagenicity or carcinogenicity not available
Symptoms from Exposure: Throat irritation, stomach discomfort, dizziness, rash on contact
Medical Conditions Aggravated: Pre-existing skin and respiratory disorders
Eco-Toxicity: May pose toxicity risk to aquatic organisms, especially when in concentrated solutions
Persistence and Degradability: Expected to persist in natural environments based on fluorinated chain
Bioaccumulation Potential: High potential in aquatic organisms due to perfluorinated moiety
Soil Mobility: Likely to move in soil and reach groundwater, avoid release outdoors
Other Adverse Effects: Data gaps on effects in terrestrial and aquatic systems, favor containment
Waste Treatment: Dispose of in accordance with local, state and federal regulations; incineration in licensed facility preferred
Packaging Disposal: Triple rinse containers before disposal or recycling
Prohibited Disposal Methods: Do not dispose in sewer, surface water, or unlined landfills
Contaminated Waste: Handle with same precautions as original product, use sealed and labeled containers
Consultation: Seek approval from environmental authorities and waste disposal contractors for bulk disposal
UN Number: Not assigned for this specific compound
Transport Hazard Class: Not classified as hazardous for ground, air or sea transport under most regulatory frameworks
Packing Group: Not applicable
Marine Pollutant: May be classified under environmental hazards due to persistence, check local regulatory interpretations
Special Precautions: Use sturdy, well-sealed packaging; clearly label with chemical identification and handling instructions
OSHA Status: Not listed as specifically regulated; subject to general duty clause for workplace safety
TSCA: Not typically listed among US EPA TSCA inventory, confirm compliance before use;
SARA Title III: Not regulated under Sections 302, 304, or 313
REACH Status: Substance may require pre-registration for use in the EU, consult updated REACH annexes
Other Regulatory Listings: Not classified as a controlled drug or explosive; always refer to local guidelines
Labelling Requirements: Proper chemical name, hazard pictograms, signal words and safety data must be on containers in the workplace or in transit
